Discrimination of Beers by Cyclic Voltammetry Using a Single Carbon Screen-printed Electrode

A fast, simple and costless methodology without sample pre-treatment is proposed for the discrimination of beers. It is based on cyclic voltammetry (CV) using commercial carbon screen-printed electrodes (SPCE) and includes a correction of the signals measured with different SPCE units. Data are submitted to partial least squares discriminant analysis (PLS−DA) and support vector machine discriminant analysis (SVM−DA), which allow a reasonable classification of the beers. Also, CV data from beers can be used to predict their alcoholic degree by partial least squares (PLS) and artificial neural networks (ANN). In general, non-linear methods provide better results than linear ones.     

Voltammetric Analysis of Oxymetazoline Hydrochloride at Zeolite – Modified Carbon Paste Electrode in Micellar Medium

Simple, sensitive, accurate and inexpensive differential pulse (DPV) and square wave (SWV) voltammetric methods utilizing zeolite modified carbon paste electrode (ZMCPE) were developed for the determination of Oxymetazoline hydrochloride (OXM) in nasal drops. Various experimental parameters were optimized using cyclic voltammetry (CV). Calibration curves were linear over the concentration ranges 9.8×10⁻⁸–3.6×10⁻⁶ M and 9.8×10⁻⁶–9×10⁻⁵ M for DPV and SWV, respectively. The DPV method showed a limit of detection (LOD) of 1.04×10⁻⁷ M. The method was applied for the determination of OXM in pharmaceutical formulation with an average recovery of 101.18 % (%RSD=0.41, n=9).     

Novel Potentiometric Solid-contact Electrode for the Determination of Fe2+ Ions via MWCNTs-Gemifloxacin Composite

A novel electrode was fabricated for the quantitation of Fe²⁺ ion. It was based on the covalent attachment of the gemifloxacin molecule (the recognition element) to the surface of MWCNTs to be incorporated as an electroactive material. Linear response of Fe²⁺ ions was found in the concentration range of 1×10⁻² mol L⁻¹ to 1×10⁻⁸ mol L⁻¹ with a Nernstian slope of 30.37 ±0.3 (mV/decade) and attained a stable response within 5 s. The sensor exhibited LOD value of 4.8×10⁻⁹ mol L⁻¹. It was applied in the monitoring of Fe²⁺ concentration in multi-vitamins tablets, tap water and milk samples with acceptable recovery ranged from 94.00 % to 102.00 %.     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.     

AgNP-decorated SBA-15 for MWCNT Paste Modified Electrode: A Sensor for Simultaneous Voltammetric Determination of Paracetamol and Sulfamethoxazole

A new electrochemical sensor based on a carbon nanotube paste electrode modified with a Santa Barbara Amorphous material (SBA-15) decorated with silver nanoparticles, namely CNT/SBA/Ag-PE, was developed. It was successfully applied for individual and simultaneous determination of both paracetamol (PC) and sulfamethoxazole (SMZ) medicines. The electrode exhibited a linear dynamic range of 0.12–110 μmol L⁻¹ for paracetamol and 0.06–70 μmol L⁻¹ for sulfamethoxazole, and detection limits of 38 and 19 nmol L⁻¹, respectively. The proposed sensor offered high sensitivity, fast response time and the potential for detecting both drugs simultaneously. The CNT/SBA/Ag-PE enabled the simultaneous determination of PC and SMZ in urine samples with high recovery rates.     

Hierarchical Porous Tubular Biochar Based Sensor for Detection of Trace Lead (II)

Hierarchical porous tubular biochar (PTBC) was prepared by selectively removing lignin simply according to reverse the pyrolysis sequence of cellulose. The properties of the PTBC sample were characterized by XRD, SEM, TEM, Raman spectra, cyclic voltammetry and electrochemical impedance spectroscopy. The electrochemical performances of PTBC modified on the screen-printing electrode illustrated excellent detection of lead ions (lead (II)) in water with the linear range (0.5–120 μg/L) and the detection limit (0.02 μg/L) by in-situ bismuth film square wave anode stripping voltammetry.     

金-石墨烯修饰电极电化学检测塑料瓶中双酚A

在离子液体碳糊电极(CILE)表面上采用一步电还原法制备了纳米金(nAu)-石墨烯(GR)复合膜修饰电极(nAu-GR/CILE)。研究了双酚A(BPA)在nAu-GR/CILE上的电化学行为,BPA的电极反应过程为受吸附控制的不可逆过程;采用示差脉冲伏安法研究了BPA氧化峰电流和浓度之间的关系,在0.08~400.0μmol/L范围内,检出限为0.021μmol/L(3σ)。将nAu-GR/CILE用于塑料瓶中BPA的检测,与采用高效液相色谱法(HPLC)进行对比,结果表明两种方法对BPA的检测结果相吻合。     

三维钴基MOF[KCo7(OH)3(ip)6(H2O)4]·12H2O作为超级电容器的高容量电极材料

为了开发较高能量密度的超级电容器,我们通过简单的溶剂热反应合成了一种三维的钴基金属有机框架(MOF)化合物([KCo7(OH)3(ip)6(H2O)4]·12H2O,Co?ip;ip=间苯二甲酸根),并考察了其作为超级电容器电极材料的性能。Co?ip电极显示出高比电容、良好的循环稳定性和优良的倍率性能。在1 mol·L^-1 KOH溶液中,电流密度为1 A·g^-1时,其最大比电容为1660 F·g^-1。在电流密度为2 A·g^-1条件下,循环3000次后,其比电容的保持率为82.7%。优异的超级电容性能可归因于Co?ip具有纳米尺寸颗粒和三维的多孔结构。     

La2-xBixCuO4阴极材料的合成与电化学性质

采用甘氨酸-硝酸盐法合成了固体氧化物燃料电池阴极材料La_2-xBi_xCuO₄（x=0、0.05、0.10）,并利用X射线衍射（XRD）对材料的物相进行分析。结果表明,La_2-xBi_xCuO₄形成单一的类钙钛矿结构氧化物,且晶胞体积随着铋掺杂量的增加而增大。在950℃烧结24 h过程中,La_2-xBi_xCuO₄不与电解质Sm_0.2Ce_0.8O_1.9（SDC）发生反应,表明这种电解质材料具有良好的高温化学相容性。电导率测试结果表明Bi的掺入显著提高了材料电导率。程序升温脱附测试结果表明,铋的掺杂显著增强了材料的表面氧吸附能力。不同氧分压下的交流阻抗谱测试结果表明,La_1.9Bi_0.1CuO₄阴极在700℃空气中的极化电阻为0.26 Ω·cm²,以电解质SDC支撑的单电池NiO-SDC/SDC/La_1.90Bi_0.10O₄在700℃的最大输出功率密度为308 mW·cm^-2,电极反应的速控步骤为氧分子的扩散与表面吸附过程。